Search results for "Equilibrium moisture content"

showing 8 items of 8 documents

New trials in the consolidation of waterlogged archaeological wood with different acetone-carried products

2011

Some acetone-carried consolidants for waterlogged archaeological wood were tested in order to evaluate treatments able to save time and energy. In details, colophony (rosin), two esterified colophonies (Rosin 100® and Rosin 459®), a mixture of colophony with PEG 3400 and a vinyl acetate - vinyl versate copolymer (Vinavil 8020S®) were tested. The treatments were carried out at temperatures of 20 and 35 °C on waterlogged maritime pine, elm, oak and beech. The materials came from the archaeological Site of the ancient ships of Pisa (Tuscany, Italy) and were dated back to VII cent. BC – II cent. AD. To evaluate the processes, equilibrium moisture content and dimensional stability of treated woo…

ArcheologyConsolidation (soil)MoisturebiologyChemistryRosinbiology.organism_classificationArchaeologyEquilibrium moisture contentSettore CHIM/12 - Chimica Dell'Ambiente E Dei Beni CulturaliColophonychemistry.chemical_compoundVinyl copolymerRosinEsterifield colophonyAcetonemedicineRelative humiditywood diagnosisBeechColophony Rosin Esterified colophony Vinyl copolymer Wood diagnosis Wood decay PEg 3400 Impregnationmedicine.drugSettore CHIM/02 - Chimica Fisica
researchProduct

Mechanical properties of pultruded glass fiber-reinforced plastic after moistening

2012

Abstract The kinetics of moisture sorption under immersion in water at room and elevated temperatures and flexural characteristics of dry (conditionally initial) and wet (moistened up to saturation level) composite material were investigated on flat specimens of polyester based glass fiber-reinforced plastic, cut from I-beam pultruded profile. It was found that the coefficients of diffusion and swelling are different in three principal axis of the composite. The former have the largest value in fiber axis direction, but the latter – in transverse to fiber axis direction out of plane of the layers. The observed difference in kinetics of mass gain and change of volume strain for the specimens…

Materials scienceThree point flexural testFlexural modulusGlass fiberYoung's modulusFibre-reinforced plasticEquilibrium moisture contentsymbols.namesakeFlexural strengthCeramics and CompositessymbolsFiberComposite materialCivil and Structural EngineeringComposite Structures
researchProduct

Hydrothermal Aging of an Epoxy Resin Filled with Carbon Nanofillers

2020

The effects of temperature and moisture on flexural and thermomechanical properties of neat and filled epoxy with both multiwall carbon nanotubes (CNT), carbon nanofibers (CNF), and their hybrid components were investigated. Two regimes of environmental aging were applied: Water absorption at 70 &deg

Absorption of waterMaterials sciencePolymers and Plasticsenvironmental degradationchemistry.chemical_elementYoung's modulusCarbon nanotubecarbon nanofibresArticleepoxy resinlaw.inventionmodellinglcsh:QD241-441symbols.namesakelcsh:Organic chemistryFlexural strengthlawComposite materialnanocompositecarbon nanotubesCarbon nanofibermodelingGeneral ChemistryEpoxyEquilibrium moisture contentflexural propertieschemistryvisual_artcarbon nanofiberssymbolsvisual_art.visual_art_mediumproperty prediction modelCarbonPolymers
researchProduct

Moisture absorption, thermal conductivity and noise mitigation of clay based plasters: The influence of mineralogical and textural characteristics

2016

Abstract Three pre-mixed clay based plasters successfully employed in green building practices in several European countries (Spain, France, Germany, and United Kingdom), mainly used for interior wall coating and finishing, were tested in this paper. Their compositional and textural characteristics as well as plastic behaviour were investigated through a multi-analytical approach in a previous paper. A natural earth (Terra Rossa red soil sampled in north-western Sicily), theoretically appropriate for the production of earthen plaster, was also subjected to the same analytical routine and compared with the three commercially available products. Humidity control capacity by the determination …

Noise mitigation0211 other engineering and technologiesHumidityMineralogyGeology02 engineering and technologyMoisture absorptionRaw material021001 nanoscience & nanotechnologyEquilibrium moisture contentEarthen plasterGreen buildingNoise reduction coefficientThermal conductivityGeochemistry and PetrologyTerra rossaThermal conductivity021105 building & constructionClay based plaster0210 nano-technologyPorosityPorosityGeologySettore GEO/09 -Georis. Miner.e Appl.Mineral.-Petrogr. per l'Ambi.ed i B.Cult.
researchProduct

Environmental Effects on Mechanical, Thermophysical and Electrical Properties of Epoxy Resin Filled with Carbon Nanofillers

2019

The aim of this work was to establish the effect of environmental factors (moisture and temperature) on some mechanical, electrical and thermal properties of epoxy-based composites filled with carbon nanofillers: nanotubes (CNT), nanofibers (CNF) and hybrid nanofiller (nanotubes/nanofibers in the ratio 1:1) and to reveal the most environmentally stable NC. First, the nanocomposites (NC) containing different nanofiller contents were prepared to evaluate electrical percolation threshold and to choose NC at certain electrical conductivity for further characterization of the physical properties in initial state and during/after environmental ageing. The environmental ageing consisted of water a…

thermophysical propertiesMaterials scienceNanocompositeAbsorption of waterMoisturenanocompositechemistry.chemical_elementenviromental effectPercolation thresholdEpoxymechanical propertiesEquilibrium moisture contentepoxythermophysical propertychemistrycarbon nanofillersenvironmental ageingNanofibervisual_artelectrica propertyelectrical propertiesvisual_art.visual_art_mediumcarbon nanofillerComposite materialCarbon
researchProduct

An Original Approach to Active Climate Control Based on Equilibrium Moisture Content (EMC) as Set Point in a Middle-Age Building in Palermo, Italy

2019

In the frame of a more sustainable approach to climate control, a long term strategy has been developed and is under advanced phase of implementation by technical staff of the University of Palermo in an important building, Palazzo Steri, owned by the University. The monumental room under climate control, the Sala dei Baroni (also known as Sala Magna), has a precious wooden ceiling where the previously loadbearing elements are covered with wooden painted panels. Many of them, painted in the fourteenth c, underwent important restorations in the past due to climate related damage (cracks, warpings, paint layer delamination) and biological infestations. The room is currently undergoing an impo…

business.industryAdvanced phaseHVACEnvironmental scienceRelative humidityCeiling (cloud)businessEquilibrium moisture contentCivil engineeringSet point
researchProduct

Effect of moisture on elastic and viscoelastic properties of epoxy and epoxy-based carbon fibre reinforced plastic filled with multiwall carbon nanot…

2016

Abstract In this study, we investigated the peculiarities of moisture absorption and moisture-induced effects on the elastic and viscoelastic flexural properties of epoxy resin and carbon fibre reinforced plastic (CFRP) filled with multiwall carbon nanotubes (MWCNTs). Short-term cyclic creep-recovery tests of moistened epoxy and CFRP filled with MWCNTs revealed improvements in creep resistance for both materials. The addition of MWCNTs to the epoxy resin suppressed the moisture absorption by the material, causing a reduction in the diffusion coefficient by 31% and equilibrium moisture content by 15%. The addition of MWCNTs reduced the flexural strength of moistened epoxy and CFRP samples by…

Polymer-matrix composites (PMCs)Materials science02 engineering and technologyCarbon nanotube010402 general chemistryCarbon fibres01 natural sciencesViscoelasticitylaw.inventionFlexural strengthlawComposite materialMoistureFlexural modulusEpoxyCreepFibre-reinforced plastic021001 nanoscience & nanotechnologyEquilibrium moisture content0104 chemical sciencesCreepMechanics of Materialsvisual_artCeramics and Compositesvisual_art.visual_art_medium0210 nano-technologyComposites Part A: Applied Science and Manufacturing
researchProduct

Moisture absorption by epoxy/montmorillonite nanocomposite

2009

The peculiarities of moisture absorption of epoxy–nanoclay composite are estimated in the paper. Second Fick’s law of diffusion was used to predict moisture diffusivity and equilibrium moisture content using accelerated analytical procedure. It was experimentally confirmed that sorption process in NC passes more slowly than in pure epoxy resin, for the highest filler content diffusivity reduces about half of diffusivity as for epoxy resin. The deviation from mixture rule was obtained for the equilibrium moisture content and the estimation of interphase content in composite was undertaken. It was determined that the higher content of interphase consistently leads to greater moisture absorpti…

Materials scienceMoistureDiffusionComposite numberGeneral EngineeringSorptionEpoxyThermal diffusivityEquilibrium moisture contentchemistry.chemical_compoundMontmorillonitechemistryvisual_artCeramics and Compositesvisual_art.visual_art_mediumComposite materialComposites Science and Technology
researchProduct